Categories

Hot Products

News & Media

  • We will be closed from Feb. 1st to Feb. 10th during Chinese Spring Festival Holiday.……
    Jan 25
    2019
  • In order to avoid the failure of the seal to affect the use of the machine, we need to understand what caused the seal damage and failure.……
    Dec 13
    2018
  • O-ring design, improper use will accelerate its damage, loss of sealing performance. Experiments show that the design of each part of the sealing device is reasonable, and the pressure is simply increased, and it does not cause the damage of O-ring.……
    Nov 09
    2018
  • 1. Whether the introduction angle according to the drawing processing sharp edge whether chamfering or inverted circle; 2. Whether the inner diameter removes the burr surface is pollution-free;……
    Nov 09
    2018
  • 1. Manual Trimming. The operator holds the cutter and, along the outer edge of the product, gradually repairs the overflow. This is the most primitive method. Low efficiency, difficult quality assurance, especially for small size……
    Nov 09
    2018
  • Non-vulcanized O-ring adhesive at high temperature, pressure for viscous fluid, and to the molding vulcanization stage, the glue quickly filled with the mold cavity, its redundant part (in order to prevent the lack of glue……
    Nov 09
    2018
  • such as a power station pump turbine hardness of the Shore seal ring, often peel off, or even transverse cut off, after the use of 85~90 (Shore) sealing ring, the effect is ideal. Low hardness, easy installation, but easy to appear peeling, installat……
    Nov 09
    2018
  • The materials used as O-rings are nitrile rubber, carboxylic acid nitrile, fluorine rubber, ethylene propylene, hydrogenated NBR, silicone rubber, neoprene rubber, fluorine silicone rubber, polyurethane, chlorine alcohol, butadiene……
    Nov 09
    2018
  • Natural rubber NR (Natural Rubber) is made of latex collected from rubber trees and is a polymer of isoprene. It has good wear resistance, high elasticity, breaking strength and elongation. In the air easy to aging, in the heat and viscosity, in mine……
    Nov 09
    2018
  • Suitable for a wide range of materials, sizes and grooves have been standardized, the interchangeability is strong……
    Nov 09
    2018
  • The O-ring is suitable for installation in a variety of mechanical equipment, in the specified temperature, pressure, as well as different liquid and gas media, in the static or moving state of the sealing role. In Machine tools, ships, automobiles……
    Nov 09
    2018
  • YX Type O-Ring for Hole Product usage: Used for the sealing of piston in reciprocating hydraulic cylinder. Scope of application: TPU: General hydraulic cylinder, general equipment hydraulic cylinder. CPU: Hydraulic Cylinder for construction machinery……
    Nov 09
    2018
  • O-Ring specification model mainly has UHSO shape ring specifications, UHPO ring specifications, Uno ring specifications, DHO ring specifications, Piston rod O-ring specifications, high-temperature O-Ring, high-pressure O-ring, corrosion-resistant O-r……
    Nov 09
    2018
  • QR CODE
  • facebook